Hanna Instruments HI 98188 - Manual (Page 36)

36
The following table lists the specific range parameters:
Item Description Valid value Default
Calibr. Number of days after Disable, 1 to 7 days Disable
Timeout Calibration warning
(EC, NaCl) is displayed
Out cal Display warning if the Enable/Disable Disable
range check reading is too far from the
(EC range
calibration points
only)
Temperature Temperature
Probe/Manual Probe
source entry mode
Temperature No TC, Linear No TC
compensation
Non Linear
mode
Range select Fix one Automatic, Fix one
Automatic
specific range resolution of
EC or resistivity range
Cell constant Manual set of
0.010 to 10.000 1.000
the cell constant
Temperature Set the coeficient 0.00 to 10.00 %/°C 1.00 %/°C
coeficient for linear temperature
compensation
Temperature Reference temperature 15 °C, 20 °C, 25 °C 25 °C
Ref
Temperature unit
°C or °F °C
TDS factor 0.40 to 1.00 0.50