Hanna Instruments HI 98188 - Manual (Page 45)

45
Press Modify to select ranging mode.
Use the Arrow keys to change selection.
Press Accept to confirm or ESC to exit without saving. If Automatic is selected
the instrument changes the range automatically according with the input.
If one of the range is selected all the readings are displayed on the correspond-
ing range.
The readings will be displayed with maximum 6 digits. If the reading exceeds
the maximum number of digits for the fixed range, the maximum value is
displayed blinking.
Note: The Range select parameter can be set only in EC and resistivity range.
Cell constant
Focus on the
Cell constant item.
Press Modify to change the cell constant value.
Out of Cal-Range Warning
Focus on the
Out of Cal-Range Warning item.
Use Arrow Keys to change the cell constant value.
Press Accept to confirm or ESC to exit without changing.