Hanna Instruments HI 5000 - Manual (Page 34)

34
All Hanna controllers are warranted for two years against
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions.
Damages due to accident, misuse, tampering or lack of prescribed
maintenance are not covered. This warranty is limited to free of
charge repair or replacement of the meter only, if any malfunction-
ing is due to manufacturing defects.
If service is required, contact the dealer from whom you purchased
the instrument. If under warranty, report the model number, date
of purchase, serial number and the nature of the failure. If the
repair is not covered by the warranty, you will be notified of the
charges incurred. If the instrument is to be returned to Hanna
Instruments, first obtain a Returned Goods Authorization Number
from the Customer Service department and then send it with
shipment costs prepaid. When shipping any instrument, make sure
it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty
card within 14 days from the date of purchase.
WARRANTY WARRANTY WARRANTY WARRANTY WARRANTY
OTHER ACCESSORIES
BL PUMPS Dosing pumps (several models are available with
flow rates from 1.5 to 18.3 lph / 0.4 to 4.8 gph)
ChecktempC Pocket-size thermometer (range -50.0 to 150.0°C)
ChecktempF Pocket-size thermometer (range -58.0 to 302.0°F)
HI 6050
Submersible pH electrode holder (605 mm/23.8"
total length)
HI 6051 Submersible pH electrode holder (1105 mm/43.5"
total length)
HI 6054B Electrode holder for in-line applications
HI 8427 pH Electrode Simulator and high impedance tester
with 1 m (3.3') Coaxial Cable ending in a male BNC
connector (HI 7858/1)
HI 931001 pH Electrode Simulator with LCD display and 1 m
(3.3') Coaxial Cable ending in male BNC connector
(HI 7858/1)