Hanna Instruments HI 84529-01 - Manual (Page 20)

www. hannainst .com 20 Setup/Installation
Prime burette screen when the dosing
system is running.
This error message appears when the
pump is not working properly. Check the
tubing, valve and syringe. Press RESTART
to try again
This screen appears when the titrator
is in calibration mode. Press PUMP to
calibrate Pump. Press ELECTRODE to
calibrate pH electrode.
Pump calibration is initiated by pressing
the START key.
This screen appears while pump
calibration is in progress. Press ESC
or STOP key to return to the Pump
Calibration screen.
Pump
Calibration
Messages
Guide to
Display
Codes