Hanna Instruments HI 904 - Manual (Page 26)

2-4
SETUP
14 Power Adapter ........................................................ 1 pc.
15 USB Cable ............................................................... 1 pc.
16 Instruction Manual Binder ......................................... 1 pc.
17 USB Storage Device ................................................. 1 pc.
18 HI 900 PC Application (Install Kit on USB Stick) ........ 1 pc.
19 Quality Certificate .................................................... 1 pc.
See Appendix 3 section A 3 Titrator components for pictures.
If any of the items are missing or damaged, please contact your sales representative.
Note: Save all packing materials until you are sure that the instrument functions correctly.
Any damaged or defective items must be returned in their original packing materials
together with the supplied accessories.
2.2 Safety Measures
The following safety measures must be followed:
1. Never connect or disconnect the air pump assembly with the titrator turned on.
2. Always check that the reagent and waste bottles and the titration vessel are properly
assembled.
3. Always wipe up spills and splashes immediately.
4. Avoid the following environmental working conditions:
• Severe vibrations
• Direct sunlight
• Atmospheric relative humidity above 80% non-condensing
• Environment temperatures below 10°C and above 40°C
• Explosion hazards
5. Have the titrator serviced only by qualified service personnel.