Hanna Instruments HI 904 - Manual (Page 15)

15
QUICK START GUIDE
• Transferring a report file will automatically transfer the corresponding log file and
titration graph BMP file (if applicable).
• Press , to return to the General Options screen.
• Press again, to return to the Idle screen.
Titration report
While scrolling with the and keys, the fields below can be seen on the titrator
display or printed. The same information is available on the saved report file (KF_00003.rpt
in this example, with all report fields selected).
HI904 - Titration Report
Method Name: Moisture in Chloroform
Time & Date: 15:15 Jul 28, 2013
Titration ID: KF_00003
Company Name: Hanna Instruments
Operator Name: KF Technician
Electrode Name: Probe 1
Field 1: Any text
Field 2: Any text
Field 3: Any text
Titrator Software Version: v1.00
Base Board Software Version: v3.00
Titrator Serial Number: 04132903
Analog Board Serial Number: 33121212
Analog Calibration Date: Jul 18, 2013
Method Parameters
Name: Moisture in Chloroform
Method Revision: 1.0
Type: KF Coulometric
Pre-Analysis Stir Time: 5 Sec
Stirring Speed: 900 RPM
Stirbar Type: Medium
Drift Entry: Automatic
Reagent: General Purpose
Sample Parameters:
Sample Determ.: Normal
Sample Name: Chloroform
Sample Type: Mass
Sample Size: 2.8101 g
Control Parameters:
Titration Speed: Auto
Standby Mode: Enabled
Standby Duration: 72:00 [hh:mm]
Imposed Current: 2 A
End Point Value: 100.0 mV
Generator Current Mode: Auto
Signal Averaging: 2 Readings
Termination Parameters:
Maximum Duration: 1200 sec
Maximum Titrated Water: 10.0 mg
Term. Criterion: Relative Drift
Relative Drift: 3.0 µg/min
Result Unit: ppm