Hanna Instruments HI 904 - Manual (Page 111)

8-9
MAINTENANCE, PERIPHERALS
8.5.4 Connecting to a Computer
The titrator can be connected to a computer using a USB cable. HI 900 PC application
needs to be installed on the PC.
Connect the cable to the USB port on the rear panel of the titrator.
Connect the cable to the USB port on the PC.
Select the USB Link with PC screen on the titrator by following the path:
General Options - USB Link with PC
Launch the HI 900 PC application and then select the appropriate USB port on the PC.
The HI 900 PC application allows the transfer of files (methods and reports) between titrator
and PC.