Hanna Instruments HI 98703 User Manual
Page 34
34
• Press
LOG/CFM to save the new time. The
new set time will be displayed. Alternatively,
press
CAL to exit without saving the changes.
SET INSTRUMENT ID
The instrument ID is a four digit number that can
be edited by the user. The instrument ID is
downloaded on the PC application, together with
the logged data. By setting a different ID for each
instrument it is possible to mix information from
many turbidimeters into the same database.
• To set the instrument ID, press
CAL when set
instrument ID panel is displayed. The default
instrument ID is 0000. The existing ID value
and “
CFM” tag will start blinking.
• Press the
▲
or
▼
keys to set the new
instrument ID. By pressing and holding the
▲
or
▼
keys, the changing speed wil increase.
• Press
LOG/CFM to save the change. The new
instrument ID will be displayed. Alternatively,
press
CAL to exit without saving the changes.
SET BAUD RATE
The
HI 98703 has a RS232 and a USB link. When
the USB connection is used, the RS232 connection
becomes inactive.
To successfully communicate with the PC, the same
baud rate must be selected on the instrument and
on the PC application. The available baud rates are
1200, 2400, 4800 and 9600.
• To set the baud rate, press
CAL when set baud
rate panel is displayed. The parameter value
and “
CFM” tag will start blinking.