beautypg.com

General description – Hanna Instruments HI 96101 User Manual

Page 4

background image

4

GENERAL DESCRIPTION

The HI 96101 is an auto diagnostic portable microprocessor meter that benefits from Hanna’s
years of experience as a manufacturer of analytical instruments. It has the advanced optical
system based on a special tungsten lamp and a narrow band interference filter that allows most
accurate and repeatable readings. All instruments are factory calibrated and the electronic and
optical design minimizes the need of frequent calibration.
With the powerful CAL CHECK

TM

validation function, you are able to validate good performance

of your instrument at any time. The validation procedure is extremely user friendly. Just use the
exclusive HANNA ready-made, NIST traceable standards to verify the performance of the
instrument and recalibrate if necessary.
All instruments are splash waterproof and the lamp and filter units are protected from dust or dirt
by a transparent cup. This makes the instruments fulfill field applications. Display messages aid
the user in routine operation. The meter has an auto-shut off feature that will turn off the
instrument after 10 minutes of non use in

measurement mode

or after 1 hour if left in

calibration mode

.

The meter uses an exclusive positive-locking system to ensure that the cuvette is in the same
position every time it is placed into the measurement cell. It is designed to fit a cuvette with a
larger neck making it easier to add both sample and reagents. The cuvette is made from special
optical glass to obtain best results.
The HI 96101 meter measures pH, Free and Total Chlorine, Cyanuric Acid, Iodine, Bromine and
Iron Low Range content in water and wastewater samples in the following ranges:

The reagents are in liquid and powder form depending on the parameter and they are supplied
in dropper bottles and packets. The amount of reagent is precisely dosed to ensure the maximum
repeatability.

Parameter

Range

pH

6.5 to 8.5 pH

Free Chlorine

0.00 to 5.00 mg/L

Total Chlorine

0.00 to 5.00 mg/L

Cyanuric Acid

0 to 80 mg/L

Iodine

0.0 to 12.5 mg/L

Bromine

0.00 to 10.00 mg/L

Iron LR

0.00 to 1.60 mg/L