Delphi Portable Navigation Nav100 - Manual (Page 26)

26 ENGLISH
SYSTEM CONFIGURATION
■
BACKLIGHT
1 Tap »–« or »+« to adjust the screen backlight level.
2 Tap »
Ȃ
« to apply the changes made.
3 Tap »<« or »>« under the »Battery« and »AC Power«
settings.
– Options include Never, backlight off after 10 or 15
seconds and backlight off after 1, 2, or 3 minutes.
4 Tap »
Ȃ
« to apply the changes made.
■
DATE TIME
Refer to the “Starting up” section on page 12 and 13.
■
LANGUAGE
Refer to the “Starting up” section on page 12 and 13.
Notes
The Nav100’s user interface supports nine languages.
This includes English, Italiano, Français, Castellano,
Deutsch, Português, Nederlands, Dansk and Svenska.
If you change the menu language (default setting
»English«), the menu options will no longer correspond
with the English menu options listed in this instruction
manual.
To load additional language options, refer to the
Destinator User’s Guide.
When an additional language is installed and selected, it
will only affect the Destinator DG user interface. System
menus and non-navigation screens (Contacts, MP3,
Photo) will default to English.
■
SYSTEM INFO
Your device’s model name and related technical specifica-
tions are displayed. Options for factory reset, GPS reset,
and screen recalibration are also shown.
■
RECALIBRATING THE SCREEN
If while using the device, you discover tapping an item
doesn’t bring up the appropriate response, it means your
device has lost its calibration. Reclibrate the screen.
1 Tap »Calibration« on the system info screen.
2 Tap the center of the black dot as it moves around the
screen.
3 Tap the black dot again to apply the changes made.