Hall Research HR-4P - Manual (Page 5)

Programmable Serial Controller
5
Download
 Click the Download button on the left of the Main screen to retrieve the current configuration strings
stored in a HR-4P unit and into the GUI software.
 As the configuration screens are downloaded, the GUI interface will update with the retrieved
settings.
Show Config
 Click the Show Config button to display the current configuration present in the GUI. Figure 3 below shows an
example of a unit‟s configuration. All INPUT Strings and IR Codes are available
 Configuration settings can be saved and loaded from disk by using the “FILE” menu at the top of the main screen.
 Configuration settings can be uploaded into the HR-4P unit by clicking the Upload button displayed on the left of
the main screen.
 Configuration settings can be downloaded in the GUI by clicking the Download button displayed on the left of the
main screen.
Figure 3
– Sample Configuration Display
Note You will see smaller Download button icons peppered throughout the pages of the GUI. The big
download button along the left column downloads EVERYTHING from the target unit. If you just
want to download a specific command or configuration, then you use the small download
buttons. The buttons have tooltips, so if you hover your mouse pointer over them, you will see a
pop-up text that explains exactly what it will do.