Denon AVR-785 - Manual (Page 47)

Dolby Pro Logic II x (Pro Logic II ) mode
2 Select the Dolby Surround Pro Logic II x mode.
LOGIC II
Light
(Main unit) (Remote control unit)
3
Play a program source with the mark.
• For operating instructions, refer to the manuals of the respective components.
5, 7 4, 6 1 2
4
5, 7
1
9
5, 7
2
6
6
STANDARD
4 Select the surround parameter mode.
1 Select the function to which the component you want to play
is connected.
Example: DVD
FUNCTION
(Main unit) (Remote control unit)
Display
To perform this operation from the remote control unit, check that
the mode selector switch is set to “AUDIO”.
• The Dolby Pro Logic II indicator lights.
The Dolby Surround Pro Logic
II x Cinema or Music mode can
be chosen directly by pressing
the CINEMA or MUSIC button
on the remote control unit
during playback in the Dolby
Surround Pro Logic
II x mode.
To play in the PL II x mode, set “S. BackSp” at the Speaker Configuration setting to “1Sp” or “2Sp”.
To play in the PL II x mode, set “Surround Back” at the Power Amp Assign setting.
SURROUND
PARAMETER
(Main unit)
(Remote control unit)
Display
47
ENGLISH