Glow-worm Clearly Solar System - Manual (Page 27)

27
Error collector sensor (array 1)
This error occurs if the there is a problem with the collector
sensor, or if it is not connected.
Error collector sensor (array 2)
This error occurs if a sensor is connected for hydraulic plan
1. Alternatively for hydraulic plan 2 or 3, if there is a problem
with the connected sensor or it is not connected.
Error messages
The Fluropro solar controller shows error messages in
the main operating menu if there is a problem with the
temperature sensor.
The sensor configuration will always be displayed when the
controller is switched on for the first time, or if the power
has been switched off and on again. Depending on the set
hydraulic plan, the controller recognises whether there is a
problem, or if the sensor is not necessary for operation.
The following diagrams assume that the day is Monday
and that the timer is active for reheat but is not currently
reheating.
Error Upper cylinder sensor
This error occurs if there is a problem with the heating circuit
sensor connected.
Error Lower cylinder sensor
This error occurs if there is a problem with the solar circuit
sensor, or if it is not connected.
8 Control - Fault Finding