FeiYu Tech FY-DOS - Manual (Page 15)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected] Page 15
Flying wing
aircraft
2.Elevons Navigation control with aileron, it can
be used for all kinds of flying wing
plane
5.Elevons
(RUD NAV)
Navigation control with rudder, only
can be used for one that has separate
rudder
V tail aircraft with
Aileron
3.V-Tail Navigation control with aileron
6.V-Tail
(RUD NAV)
Navigation control with rudder, only
can be used for V-tail plane that has
separate rudder
Traditional layout
aircraft with no
Aileron
1.Normal The rudder has to connect to DoS
aileron servo output position (AIL)
V tail aircraft
without ailerons
2.Elevons V tail aircraft servo has to connect with
position of differential servo 1 and 2
Airship 4.Normal
(RUD NAV)
Need more test flights, please use it
with caution.
“Switch Mode”SW2 function settings window:
Usually, we need a 3-position switch (named as “SW2”) to switch the navigation mode, you can set different
functions by software in sw2.
Note: SW2 is priority than SW1, only when SW2 is in "Null" mode, then SW1 can work. so, we have to set a NULL,
otherwise SW1 doesn‟t work. We recommend SW2 middle position is set to Null, both sides can be set the navigation
mode which you like.
SW2 is a 2-position switch.
We recommend to set it as the right picture of above, the “middle” and the “down” position is set to null, the “up”
position is used to select the navigation mode you like.
navigation mode:
Name Function Remark
Null Deactivated Mode
SW2 set to NULL, flying mode is in
sw1
Go Home
Auto Return To
Launch Mode
Automatically return to launch point.
Line
Fixed altitude and
Heading lock flight
Mode
After release the operating stick, it will
lock heading and altitude.
Circle Auto Circling Mode
Automatically around a fixed point
flying.
“Reverse”-Automatic control servo surface reverse window: