beautypg.com

FeiYu Tech FY-DOS User Manual

Page 12

background image

Guilin Feiyu Electronic Technology Co., Ltd

Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected] Page 12


Initialization / Reset Process:

1,power on and keep stationary.

2,switch to ABM.

3,On SW1,switch ABM to Deactivated Mode 6 times, time interval has to be less than 3 seconds as follows:

ABM→ Deactivated Mode → ABM → Deactivated Mode → ABM → Deactivated Mode → ABM → Deactivated

Mode → ABM → Deactivated Mode → ABM → Deactivated Mode.

4,DoS indicator will flash white about one second.

5,After white lamp lights off, the re-setting / initialization is complete.

(If you connect a DoS setup software, you can initialize it by click "Init GYRO" button.)

16. DoS Setting Software:

connection mode:



First need install USB-TTL device driver, you can download it form our website:

www.feiyudz.cn

Software Interface Description:(

Parameter in the following picture is default parameter

)

USB Cable