EXFO PPM-350C PON Power Meter - Manual (Page 7)

PPM-350C 1
1 Introducing the PPM-350C
PON Power Meter
The PPM-350C PON Power Meter was designed for two main purposes:

Suit FTTP testing needs and to be easy to use for people who are not necessarily
familiar with fiber optics in FTTx.

Be used as a standard optical power meter (OPM operation mode).
Main Features
FTTx Operation Mode

Supports:

Port 1: 1310 nm (ONT)

Port 2: 1490 nm (OLT)/1550 nm (video)

Pass-through device (spy mode): does not block communication between ONT
and OLT.

Allows triple-play testing (voice, video and data).

Measures each signal independently: Optical Network Terminal (ONT) -
1310 nm; central office (CO) - 1490 nm and 1550 nm.

Measures optical power of any type of signal:

Continuous (for example, TV signal at 1550 nm)

Framed (for example, ATM, Ethernet at 1490 nm or 1310 nm)

All baud rates (for example, 155 Mbps, 1 Gbps; synchronous or
asynchronous)

Measures all signals simultaneously.

Features visual Pass/Fail indicators (one indicator per wavelength; all signal
statuses are displayed simultaneously).

Displays all power levels simultaneously.

Contains up to 10 different threshold sets (you can configure thresholds on a
computer and transfer them to your PPM-350C with a USB cable).