EXFO PPM-350C PON Power Meter - Manual (Page 45)

PPM-350C 39
A Technical Specifications
I
MPORTANT
The following technical specifications can change without notice.
The information presented in this section is provided as a reference
only. To obtain this product’s most recent technical specifications,
visit the EXFO Web site at www.exfo.com.
Specifications a
FTTx MODE PPM-352C PPM-353C
Power measurement range—pass zone for continuous data stream (dBm)
1310 nm 8 to –40 8 to –40
1490 nm 12 to –40 12 to –40
1550 nm 25 to –40 N/A
Burst measurement capability CO to ONT CO to ONT
Burst measurement range b (dBm)
1310 nm 8 to –30 8 to –30
ORL e (dB)
1550 nm 55 55
Pass-through insertion loss b (dB) 1.5 1.5
Spectral passband (nm)
1310 nm 1260 to 1360 1260 to 1360
1490 nm 1480 to 1500 1480 to 1500
1550 nm 1539 to 1565 1539 to 1565
Power uncertainty b, c, d (dB) 0.5 0.5
Calibrated wavelengths (nm) 1310/1490/1550 1310/1490
Threshold sets 10 configurable threshold sets 10 configurable threshold sets
with threshold naming with threshold naming
GENERAL SPECIFICATIONS
Size (H x W x D) 195 mm x 100 mm x 57 mm ( 7 11 / 16 in x 4 in x 2 1 / 4 in)
Weight f 0.4 kg (0.9 lb)
Temperature
Operating –10 °C to 50 °C (14 °F to 122 °F)
Storage f –40 °C to 70 °C (–40 °F to 158 °F)
Relative humidity 0 % to 95 % non-condensing
Autonomy b (hours)
FTTx mode (burst) 35
OPM mode (CW) 80
Number of ports 2
Warranty and recommended calibration interval (years) g 3
Notes
a. At room temperature.
b. Typical.
c. Around –7 dBm, CW.
d. At calibrated wavelengths.
e. For APC connectors.
f. Without batteries.
g. Excluding connector wear.
CLASS 3R WITH VFL OPTION