EXFO EXpert IP Test Tools - Manual (Page 29)

Test Setup
EXpert IP 23
Configuration (Ping)
Configuration (Ping)
From the Main Menu, tap Ping, and the Configuration tab.
Configuration

IP Address/DNS allows to enter the destination IP Address or DNS. A
maximum of 63 characters are allowed. The default setting is
127.0.0.1.

Timeout (ms) allows to enter the time to wait for a response in
milliseconds for the last ICMP echo message: 1 to 60000 milliseconds
(default is 1000 milliseconds).

Delay (ms) specifies the time to wait between sending ICMP echo
packets in milliseconds: 1 to 60000 milliseconds (default is is
1000 milliseconds).

Data Size (bytes) specifies the size of the packets to be transmitted in
bytes: 0 to 1450 bytes (default is 32 bytes).

TTL specifies the Time To Live field in the IP header of the ICMP echo
packets: 1 to 225 (default is 64).

DiffServ Code Point specifies the Type of Service field according to
diffserv's DS codepoint in the IP header of the ICMP echo packets: 0 to
63 (default is 3).

Number of Ping Requests specifies the number of ICMP echo packets
to be transmitted: 1 to 255 (default is 5).