EXFO EPM-500 Power Meter - Manual (Page 6)

Introducing the EPM-500/ELS-500/EOT-500 1
1 Introducing the
EPM-500/ELS-500/EOT-500
This user guide covers the following products (unless otherwise specified,
descriptions apply to all):
³
EPM-500 Power Meter
³
ELS-500 Light Source
³
EOT-500 Optical Loss Test Set: combines both a power meter and a light source
Main Features
EPM ELS EOT
Ge or GeX detector with 6 calibrated wavelengths X X
Absolute power and link loss measurements X X
Automatic wavelength detection X X
No offset nulling of detectors required in normal operation X X
Multiple source configurations on a single port [EOT-500] or
on one or two ports [ELS-500] X X
Optional visual fault locator X X X
Transmission of editable power value with source’s signal for
automatic reference with compatible power meter X X
Transmission of wavelength to compatible power meter in
automatic wavelength or auto-switching mode X X
Modulated signal emission or detection (270 Hz, 1 kHz and
2 kHz) compatible with other EXFO units X X X
Data storage on unit and USB transfer to a computer X X
User-configurable pass/fail thresholds with LED indicator X X
Automatic shutdown after 10 minutes of idle time (auto-off) X X X