EXFO EPM-500 Power Meter - Manual (Page 28)

Saving and Recalling Power/Loss Values 23
Transferring Data to a Computer
Using an appropriate USB cable and the Handheld Data Transfer software, you can
transfer saved data from your handheld unit to a computer. This way, you can
increase storage capacity, perform better analyses on your data and create reports.
To transfer data to a computer:
1. Using a USB cable, connect your unit to an available USB port of the computer.
2. Turn on both the computer and your handheld unit. Connect your unit to a
power outlet to ensure that your unit will remain on during the transfer.
3. On the computer, launch the Handheld Data Transfer application and start the
operation.
The unit displays “REM” and temporarily deactivates the keyboard and auto-off.
Note: For details about setting up the software and transferring data, refer to
the Handheld Data Transfer online help.
I
MPORTANT
Transferred data is not automatically deleted from your unit.
USB port
USB connector