Eurocom Shark 2 - Manual (Page 218)

Modules
7 - 72 Sound Blaster Cinema EQ
7
Sound Blaster Cinema Settings
Sound Blaster Cinema selects the built-in speakers by default and this setting may
cause some sound quality issues when using headphones. To adjust the settings for
headphones do the following:
1. Run the Sound Blaster Cinema application.
2. Select Settings from the menu.
3. Select Headphones from the drop-down menu (you can adjust the slider for
crossover frequency).
4. Click OK and close the application.
Figure 7 - 57
Sound Blaster Cinema
Select Headphones Settings