ENMET MX-52 - Manual (Page 9)

MX52 C ONTROL ENMET Corporation
5
3.0 Features 3.0 Features 3.0 Features 3.0 Features
See Figure 4 for features.
Description Function
Power Card Internal power supply
See figures 5 for detail.
Display For visual display of:
Channel, Gas (type and reading), Data when programming etc…
On/Off Pushbutton Switch To power up and remove power of the MX52 C ONTROL
Keypad Pushbutton switches used in programming and calibration
See figure 10 for detail
Buzzer For audio alarms
LEDs For visual alarms
Interconnect board Interface for: Channel boards, Display, Keypad, LED and Buzzer
Channel Boards Control for each channel: .2 channels per board
See figure 7 for detail.
Micro Board Connection for remote access of MX52
See figure 9
Figure 4: MX52 C ONTROL Features
Power Supply
Refer to Figure 5
Channel board
2 channels per board
8 Channel boards
• 2 channels per board
See figure 7 for detail
Micro Board
See figure 9 for detail
Keypad Area
Pushbutton switches
Display
Power Supply Card
Refer to figure 5
FRONT interconnect board
On/Off
Pushbutton
Switch
Buzzer
Rows of LEDs
for each channel
Rows of POTs
for each channel