ENMET RECON Series - Manual (Page 5)

R ECON ENMET Corporation
3
LCD, D ISPLAY N UMBER F UNCTION
1 Battery
2 Lock
3 sound
4 vibration
5 Alarming conditions
6 Warning or the maximum level
7 numeric value
8 Error
9 Not Used
10 Clock
11 Zero calibration
12 Calibration point or calibration status
13 Not Used
14 Set-up of the parameters
15 Indication of the gas concentration units
Figure 2:
RECON
Display
3.0 Description of Pushbuttons
P USHBUTTON F UNCTION D ESCRIPTION
P OWER
Activate / deactive the instrument, press and hold it for 3 seconds
Maintenance operations, See section 4
Cancel an operation
UP
Increase the display value
Check the instrument status the LCD will display Temp. °C, time, STEL
& TWA levels, maxium level, see section 4
Set up the instrument parameters, see section 4
D OWN
Decrease the display value
Maintenance operations, See section 4
S ET Confirmation of the parameters set-up
Maintenance operations, See section 4