ENMET RECON Series - Manual (Page 4)

R ECON ENMET Corporation
2
2.0 Features
2.1 R ECON Features
See Figure 1 for location of features:
F EATURE D ESCRIPTION
1 Visual Alarms Red indicators clearly visible on 3 sides and located at the top of the RECON
LED’s activate when alarm thresholds are exceeded
2 Pushbuttons P OWER , UP , S ET and D OWN Buttons
See section 3.1 for description of each pushbutton
3 Display The Liquid Crystal Display(LCD) allows messages to be read clearly:
•
4 digits (7 segments), for displaying the measurement
•
pictograms symbols used to indicate supplementing the audio and visual
alarms relating to the exceeding of thresholds, battery faults, maintenance
mode etc…
4 Belt Clip Clip to outside of clothing for hands-free operation
Attached to back of the instrument
5 Audio Alarm Loud buzzer located on the front of the instrument
The audio alarm (Buzzer) is on when the unit is in alarm.
6 Charging Socket Battery Charging Connection, to plug in battery charger
7 Sensor Located in front of the RECON
•
Type varies depending on the target gas
Front View
Figure 1:
RECON
Features