Elenco 3 1/2 Digit with Temperature - Manual (Page 33)

9. General Specifications
Display: 3¾ digit LCD with a maximum reading of 3999.
Range Control: Auto range or manual range control.
Polarity: Automatic negative polarity indication.
Zero Adjustment: Automatic
Overrange Indication: Only the “OL” display.
Low Battery: The symbol “ ” is displayed when the battery
voltage is below approximately 2.4V.
Auto Power Off: 30 minutes after stopping the switch or no key-
input, the meter automatically enters the power off mode.
Safety Standards:
EMC/LVD. The meter is up to the standards
of IEC1010 pollution degree 2; overvoltage category II (double
insulation).
Operating Environment: Temperature 32
O - 104 O F (0 O to 40 O C),
humidity <80% RH.
Storage Environment: Temperature –4
O - 140 O F (–20 O to 60 O C),
humidity <85% RH.
Power: Two 1.5V “AA” batteries.
Dimensions: 6 3/32”/155mm (H) x 2 15/16”/75mm (W) x 1 5/16”/
33mm (D)
Weight: Approx. 9.2oz./260g. (including battery and holster)
Detailed Accuracy Specifications
Accuracies are ± (% of reading + number in last digit) at 73 O F
±41 O F/23 O C ±5 O C, <75% RH.
The detailed accuracy specifications are shown in Tables 7 to 18.
Table 7. DCV Detailed Accuracy Specifications
-33-
+
Range Resolution Accuracy Note
400mV 0.1mV
±(0.5% rdg + 5)
Input Resistance: 10M
Ω
Overload Protect: 400mV
range 250V rms. The rest
600VDC or 600VAC rms.
4V 1mV
40V 10mV
400V 100mV
600V 1V ±(0.8% rdg + 5)