Nca error messages – Echelon Neuron Field Compiler User Manual

Page 24

Using the Neuron Field Compiler

OnChip EEPROM (Pool) - AVAILABLE - F0C7 F7FE 0738

OnChip EEPROM (Epilog) F7FF F7FF 0001 - NONE -

End of Memory Area List

Link Memory Usage Statistics:

EEPROM Usage: (not necessarily in order of physical layout)

(includes application use of external NVRAM)

System Data and Parameters 89 bytes

Domain and Address Tables 105 bytes

Network Variable Config Tables 6 bytes

Application EEPROM Variables 0 bytes

Library EEPROM Variables 0 bytes

Application Code and Const Data 29 bytes

Library Code and Const Data 0 bytes

Self-Identification Data 11 bytes

-----

Total EEPROM Requirement 240 bytes

Remaining EEPROM 42768 bytes

RAM Usage: (not necessarily in order of physical layout)

System Data and Parameters 701 bytes

Transaction Control Blocks 95 bytes

Appl Timers and I/O Change Events 0 bytes

Network and Application Buffers 424 bytes

Application RAM Variables 4 bytes

Library RAM Variables 0 bytes

-----

Total RAM Requirement 1224 bytes

Remaining RAM 2872 bytes

Successfully linked for FT 5000.

Memory Map (9 bytes of System EEPROM) supports extended memory.

This amount varies by the firmware version.

Extended Version Number (4 bytes) varies by firmware version.

System Upper EEPROM Area (1 byte) varies by firmware version.

Priority outgoing message transaction control block uses 28 bytes of

RAM.

Of this amount, 10 bytes varies by firmware version.

Some system RAM usage, for System Data and Transaction Blocks

(totaling 270 bytes) varies by the Neuron model, the

firmware version, and the number of receive

transaction control blocks.

Default buffer counts vary by Neuron model

(resulting in an additional 124 bytes of RAM).

NVRAM Signature = 0000 @ 4000 .. 4001

End of Link Statistics

Exporting...

Neuron Exporter, version 5.01.8, build 0

Creating 'c:\src\test\mytarget-01\a.NXE'... Done.

Creating 'c:\src\test\mytarget-01\a.XIF'... Done.

Creating 'c:\src\test\mytarget-01\a.XFB'... Done.

Creating 'c:\src\test\mytarget-01\a.APB'... Done.

Creating 'c:\src\test\mytarget-01\a.NDL'... Done.

Creating 'c:\src\test\mytarget-01\a.NME'... Done.

NCA Error Messages

Table 2 on page 19 lists the NCA error codes issued by the Neuron Field

Compiler. See the Neuron Tools Errors Guide for information about the error

codes from other Neuron Field Compiler components.