East Coast Supercharging ECS Paxton SC1500 '15 C7 Supercharger Kit - Manual (Page 35)

EASTCOASTSUPERCHARGING.COM n 609-752-0321
n 35 n
n
Install the 4 1/2 inch to 4 inch coupler on
the factory airbox and the 3 3/4 inch to 4 inch
coupler on the supercharger.
n
Proceed to install the air inlet tube. We
suggest first sliding the air inlet tube into the
supercharger first followed by the factory
airbox coupler.
n
Secure air inlet tube with supplied worm clamps.
n
Important: Once the blower is secure, check the
oil level. Make sure the blower vent plug (A) and the
blower dipstick (B) are in the proper locations. The
dipstick must be at the lowest location of the blower
gear case.
j
j
A
B