Dynavector DV 507 tonearm User Manual

Page 5

(December/3/2001)

6. Bias adjustment

For adjusting the antiskating force, make sure
that the dial indication of the antiskate dial
should coincide with the playing weight value.

But in some case due to the recording
condition or stylus shape, you are required
and allowed to readjust to the other dial
indication to obtain the better result.

All adjustments and setting up are now completed,
Your DV507 arm is designed to be maintenance
free. It will give long and reliable service but should
be treated with care and kept in a dust free
condition.

Should the arm require an overhaul or if you need
any other quations or spare parts for your DV507
please contact your dealer or Dynavector
distributor.

6. Specifications

System

Bi-axls inertia controlled dynamic and eddy current damping
dynamic balance type tone arm

Total length

306mm (including headshell)

Effective length

241mm

Overhang

15mm

Offset angle

21.5 degree

Height

59mm (liftable up to 92mm )

Depth

36mm (without connecting cable )

Height adjustability

39-72mm (at sub arm center)

Optimum cartridge weight

15 - 35grms ( including headshell)

Tracklng force adjustability

0 - 3grams by 0.2grams step

Lateral tracking angle error

-1.1 degree to +2.2 degree
(0 degree at inner band of record disk, 2.2 degree at outside)

Motion sensitivity

Lateral -- less than 50 mgrams
Vertical -- less than 40 mgrams

Net weight

1,380 grams

Output connector

5P connector with low resistance cord 0.025 ohms/m, 50pF/m

Head connector:

EIA standards

Head shell

Aluminum diced and milled (weight 15grams)l