Ditch Witch 8500 - Manual (Page 32)

8500 Tracking System Operator’s Manual
Controls - 31
8500D
CMW
File Management
Radio Options
Description Notes
Active file Indicates name of log file that is currently active.
Load file Displays a list of log files currently on the SD card. Select a file to make
it the active log file.
Create file Creates a new log file and makes it the active file.
Delete file Displays a list of log files currently on the SD card. Select a file to
delete it.
Delete all Deletes all files on the SD card and formats it for use.
Make .750 files Creates .750 files out of all log files on the SD card for import into TMS
Plus. Select this before removing SD card and importing data into TMS
Plus. See “Data Transfer” on page 59.
Upload all Uploads all log files to TMS Plus when connected through USB cable.
See “Data Transfer” on page 59. Follow prompts.
Auto-Log Stores a log point every time depth information is sent from tracker.
Options: disabled (default), enabled.
IMPORTANT: Display must have SD card installed with valid log file
active or be connected to TMS Plus.
IMPORTANT: In order for information on tracker and display to match, ensure units are set on the same
channel.
Description Notes
Channel Sets telemetry channel
Available settings: 1 (default) through 15
Tracker Control code Displays code for Tracker Control feature.