Ditch Witch JT9 - Manual (Page 123)

Complete the Job - 122
JT9 Operator’s Manual
Rinse Equipment
CMW
®
Procedure
See “Prime Drilling Fluid Pump” on page 73.
Spray water onto equipment to remove dirt and mud. Some pressure might be needed to remove dried
mud from wrench area.
Electric shock will cause death or serious injury. Stay
away.
To help avoid injury: Do not point washwand spray at overhead power
lines.
Read operator’s manual. Know how to use all controls.
Your safety is at stake.
To help avoid injury:
• Never use high flow when using washwand.
• Prime the drilling fluid pump before operating washwand. Failure to prime the drilling fluid pump will
cause flow fluctuations, which will make it difficult to control the washwand.
Pressurized fluid or air could pierce skin and cause injury
or death. Stay away.
NOTICE: Do not spray water onto operator’s console. Electrical components could be damaged. Wipe
down instead.