Jt922 operator’s manual – Ditch Witch JT922 User Manual
Page 143
Service - 142
JT922 Operator’s
Manual
500 Hour
CMW
Change Engine Oil & Filter (Normal
Service)
Change engine oil and filter every 500 hours for
normal service. Drain oil (3), change filter (2), and
add 9 qt (8.5 L) of DEO at fill (1).
Change Hydraulic Fluid and Filter
Change hydraulic fluid and filter every 500 hours.
Drain hydraulic fluid (3), change filter (4), add THF
at hydraulic fluid fill (2) and check level at sight
glass (1).
IMPORTANT: Use oil specified in temperature
chart found in “Recommended Lubricants/
Service Key” on page 130.
IMPORTANT: If hydraulic system must be
opened for repair, install new filter (p/n 153-791)
for first 50 hours of operation. If this filter
becomes plugged in fewer than 20 hours,
replace with new filter. After 50 hours of normal
operation, replace with new filter (p/n 153-792).
- JT5 (161 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)