Q-See QT528 - Manual (Page 38)

37
② Authority:
Step 1: Enter into Add user
authority; refer to Fig 4-36:
Fig 4-36 Add User-Authority
Step 2: In the authority interface, assign the definite operation right for that user.
Step 3: In the user management interface, click Setup button to modify user name, user type and binding PC MAC
address if used.
Step 4: Select the user that you want to delete in the user list box, then click Delete button to delete this user.
Step 5: Click Change password button to modify the password; click Exit button to exit the current interface.
4.8 P.T.Z configuration
P.T.Z configuration includes two submenus: serial port and advance
 Serial Port
Step 1: Enter into system configuration
P.T.Z configurationserial port; refer to Fig 4-37: