4other settings – Q-See QT528 User Manual
Page 36
35
Fig 4-30 network configuration-email
SMTP Server/Port: the name and port number of SMTP server.
Tick off “This server requires a secure connection (SSL)”; user can setup mail servers (such as Gmail) according to
actual needs,
Send address/password: sender’s email address/password
Receive address: receiver’s email address. Here user can add at least three mail addresses.
Click TEST button to test the valid of the mailbox.
Attaching image amount: user can attach at least three images by one time.
4.6.4Other settings
Step1: enable DDNS server: user needs to input user name
， password and host domain name of the registered
website, click TEST to test the effectively of relevant information.
Fig 4-31 network configuration-other settings
STEP2: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website
which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line
for the server. After the successful apply, user can access the server from the IE client by inputting that domain name.
This DVR supports myq-see.com and
DDNS services. We have included instructions for setting up
DDNS access using myq-see.com in Remote Surveillance section.
Definitions and descriptions of network configuration: