Chicago Gaming Redline GT - Manual (Page 17)

17
3.6 Connecting Foot Box Cables
A
B C
D
This section will show you
how to connect the
cables in your Redline
GT.
This drawing
represents a
top view of the
open Foot Box
Connect the four sets of
cables that you pulled
into the Foot Box when
you connected the
cabinets. First, connect
the cables with the 9-pin
connectors, marked A.
This cable powers the
taillights and speakers in
the Seat Cabinet.
Next, connect cables B, C
and D to the matching
cables, which are coming
up through the holes in
the bottom of the Foot
Box. These cables power
the strip lighting that runs
underneath Redline GT.
Connect the Shifter cable
that you pulled through
earlier to the shifter
extender cable marked E.
Make sure to check the
labels on the cables
before connecting
them.
E
F
If you are not using
USB flight sticks,
cable F is unused.
If you are using USB
flight sticks, connect the
USB cable from the
flight sticks to cable F.
For information on how
to connect flight sticks,
see page 14.
(optional)
When you have
finished connecting
the cables, replace
the Foot Box Lid and
secure it with the
screws you
removed.