Chicago Gaming Redline GT - Manual (Page 16)

16
Loosen these two
screws to adjust the
height of the TV
Support Brackets
You will now need to adjust the
length of the TV Support
Brackets so that the bottom
mounting hole lines up with the
pilot holes behind the television.
Loosen, but do not remove, the
two screws in the center of the
bracket.
When you have adjusted the
bracket to the correct length and
aligned it with the pilot hole in the
cabinet, use the two longest
screws and two washers in the TV
Bracket Hardware bag to connect
the bracket to the cabinet. Tighten
the screws that were loosened to
adjust the length of the bracket.