Bullard T4MAXISE - Manual

Bullard T4MAXISE Thermal Imager
User Manual
www.bullard.com
Congratulations
Congratulations on the purchase of your ATEX compliant Bullard T4MAXISE Thermal
Imager. The Bullard T4MAXISE combines advanced thermal imaging technology with
our expertise in high heat, impact resistant engineered polymers to bring you the
most durable thermal imager on the market. The T4MAXISE’s innovative, compact
design and logical, easy-to-use interface presents a truly personalized thermal
imaging tool to today’s firefighters.
The benefits of using thermal imaging technology as a firefighting tool encompass
nearly every aspect of a firefighter’s job. Thermal imaging is not, however, a
technology designed to replace current firefighting tactics. Rather, it is a tool that
allows the firefighter to be more effective and make better decisions. Some of the
many uses for your Bullard T4MAXISE Thermal Imager include:
• Search and rescue
• Scene assessment
• Locating the seat of the fire
• Determining the spread of the fire
• Locating hot spots
• Identifying potential flashover situations
• Determining ventilation points
• Determining entry and exit points
• Overhaul
• Hazmat
• Wildland firefighting
• Incident investigation
• Training
NOTE
To ensure that we are able to reach you with any product or software updates,
please fill out the warranty card enclosed with your Bullard T4MAXISE Thermal
Imager.
Read all instructions and warnings before using this product.
Your thermal imager is like any other tool. It must be used properly and safely. All users should be trained on the proper and safe use of thermal imaging prior to using the
T4MAXISE Thermal Imager. This is especially important for users who may use the T4MAXISE Thermal Imager in hazardous or IDLH (Immediately Dangerous to Life and Health)
environments.Failure to follow this information could result in death or serious injury.
WARNING
Lens
LCD Screen
Side Strap
Rear Boot
Lens Bezel
Figure 1
Bullard T4MAXISE Thermal Throttle
Power Button
Battery
Zoom Button