Avalue EPI-QM67 - Manual (Page 49)

User ’s Manual
EPI-QM67 User ’s Manual 49
DIMM1/2/3/4 TS READ
Disabled,
Enabled
DIMM1/2/3/4 Thermal Sensor Read Enable
PCH Thermal Device
Enable or Disable PCH Thermal Device
(D31:F6)
MCH Temp Read MCH Temperature Read Enable
PCH Temp Read PCH Temperature Read Enable
CPU Energy Read CPU Energy Read Enable
CPU Temp Read CPU Temperature Read Enable
Alert Enable Lock Lock all Alert Enable settings
PCH Alert PCH Alert pin enable
DIMM Alert DIMM Alert pin enable
PCH Hot Level Select
PCHHOT#: this signal is used to indicate a PCH temperature out of
bounds condition to an external EC, when PCH temperature is greater
than value programmed by BIOS. An external pull-up resistor is required in
this signal.
3.6.2.8 Intel TXT (LT) Configuration