Avalue ECM-LX800 - Manual (Page 59)

User’s Manual
ECM-LX800 User’s Manual 59
2F8
3E8
2E8
Serial Port 3 Use IRQ
Serial Port4 Use IRQ
IRQ5
IRQ7
IRQ10
IRQ11
This determines the IRQ in which the third and
fourth serial ports can use.
3.5.7 Power Management Setup
The Power Management Setup allows you to configure you system to most effectively save
energy while operating in a manner consistent with your own style of computer use.
3.5.7.1 Power Management
This category allows you to select the type (or degree) of power saving.
The choices: Disabled, Legacy, APM, ACPI.
3.5.7.2 MODEM Use IRQ
This determines the IRQ in which the MODEM can use .
The choices: N/A, 3, 4, 5, 7, 9, 10, 11.
3.5.7.3 PME Event Function
This determines whether to enable the PME Event wake up function or not.
The choices: Disabled, Enabled.
3.5.7.4 Soft-Off by PWR-BTTN
This determines to use power saving mode or not. When set to Delay 4 Sec, this function
allows the power button to put the system in suspend, a power saving mode; otherwise, the
computer turns completely off when the power button is pressed by setting as Instant-Off.
The choices: Instant-Off, Delay 4 Sec.