Avalue ECM-LX800 - Manual (Page 50)

ECM-LX800
50 ECM-LX800 User’s Manual
3.5.2 Advanced BIOS Features
This section allows you to configure your system for basic operation. You have the
opportunity to select the system’s default speed, boot-up sequence, keyboard operation,
shadowing and security.
3.5.2.1 Hard Disk Boot Priority
This item allows you to set the boot priority of the hard drives installed in the system.
Item Description
Pri./Sec.
Master/Slave
Boot up from IDE Primary/Secondary Master/Slave Hard Disk
USBHDD
0/1/2
Boot up from 1st/2nd/3rd USB Hard Disk
Bootable
Add-in Cards
Boot up from other Add-In Card Hard Disk Device.
3.5.2.2 Virus Warning
This item allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector
protection. If this function is enabled and someone attempt to write data into this area,
BIOS will show a warning message on screen and alarm beep.
Item Description
Enabled
Activates automatically when the system boots up causing a warning message to
appear when anything attempts to access the boot sector or hard disk partition table.
Disabled
No warning message will appear when anything attempts to access the boot sector or
hard disk partition table.
3.5.2.3 CPU Internal Cache
This category speeds up memory access. However, it depends on CPU/chipset design.
The default value is en able.