AMT Datasouth M7 - Manual (Page 43)

Page of 73 43
Gap Size
0024 dot
2. Press the button to move
the cursor from left digit to right digit,
and press the
button to set the
value from “0” to “9” and the “dot/ mm/ inch”.
Press the
button to set the gap
size into the printer.
Gap Mode
Scan Backing
Intensity
Ref. Level xxx
3. Open the print head mechanism, put the
Label backing (liner) under the media sensor.
Press the
button to set the value
into the printer.
Gap Mode
Scan Paper
Intensity
Ref. Level xxx
4. Then, Put the label with liner under the
Media sensor. Press the
button
to set the value into the printer.
Gap Mode
Complete
Intensity
Ref. Level xxx
5. The gap sensor calibration is complete.
Press the
button the LCD screen
will return to the previous menu.
A-3 Pre-Printed
This function can set the paper length and gap size before auto-calibrate the sensor
sensitivity. It can to get the sensor sensitivity accurately.
Media sensor
Label backing
(liner)
Media sensor
Label with liner