Alwarerc Streak 1000 OctoCopter Kit With APC Props - Manual (Page 9)

Step 7.
Loosen the screws of the Lower side. The Hook Side
must pointing to the Axis Line of the Lower Main
Frame for installation. Step 8.
Install the Motor Mount with Fixed Arm Assembly onto
the Lower Main Frame. Follow the installation
direction as shown above.
(Apply little amount of
Thread Locker to the screws before installation.)
Step 9.
Install four Motor Mount with Fixed Arm Assembly
onto the specific position of Lower Main Frame. Step 10.
Reserve the above four screw holes for the Landing
Gear installation in the later steps.
Step 11.
Prepare four Motor Mount with Quick Lock Mount
Assembly. Step 12.
Close view of Motor Mount with Quick Lock Mount
Assembly.
9