Alwarerc Streak 1000 OctoCopter Kit With APC Props - Manual (Page 10)

Step 13.
Loosen the screws and Quick Lock Mount of the
Lower side. The Hook Side must pointing to the Axis
Line of the Lower Main Frame for installation. Step 14.
Install the Motor Mount with Quick Lock Mount
Assembly onto the Lower Main Frame. Follow the
installation direction as shown above.
(Apply little
amount of Thread Locker to the screws before
installation.)
Step 15.
Secure Quick Lock Mount using M3x8mm Screws.
(Apply little amount of Thread Locker to the screws
before installation.)
Step 16.
Repeat step 13-15 to secure other three Motor Mount
with Quick Lock Mount Assembly onto the Lower Main
Frame.
10