Alwarerc Streak 1000 OctoCopter Kit With APC Props - Manual (Page 8)

5.0 Assembly Steps – Body
Step 1.
Loosen the screw circled above as to uninstall the
Upper Main frame from the Main Frame Assembly. Step 2.
Lower Main Frame with Power/ESC Board
preinstalled (on the left) and the Upper Main Frame
(on the right).
Step 3.
Solder 2 pairs Battery Cable to the Power.ESC Board. Step 4.
Close view of step 3 soldering.
Step 5.
Prepare four Motor Mount with Fixed Arm Assembly Step 6.
Close view of Motor Mount with Fixed Arm Assembly.
8