Alwarerc Streak 1000 OctoCopter Kit With APC Props - Manual (Page 14)

5.1 Assembly Steps – FPV and GPS Mount
Step 1.
Prepare the FPV & GPS Mounting Assembly. Step 2.
Get ready for the installation of FPV & GPS Mounting
Assembly onto Main Body.
Step 3.
Insert the FPV & GPS Mounting Assembly onto Main
Body Rib and secure with M2x6mm Hex Cap Screws.
(Apply little amount of Thread Locker to the screws
before installation.)
Step 4.
Indicate the forward flying direction.
14