ADLINK iSeries Monitor 18/21 - Manual (Page 51)

Getting Started 39
TPZ-1300
4. Depress the TPZ-1300 until a click is heard. The chassis
is now locked to the mounting bracket. All four orienta-
tions are supported, depending on the user’s requir-
ments.
2.7 Cooling Configuration
Heat-generating components of the TPZ-1300 (such as CPU and
PCH) are all situated on the left side of the system. These compo-
nents directly contact the heat sink via thermal pads and dissipate
heat generated by the components. To maximize efficiency of heat
dissipation, maintain a minimum of 2 inches (5 cm) clearance on
the top of the TPZ-1300.