6 wall-mounting the tpz-1300, Wall-mounting the tpz-1300 – ADLINK iSeries Monitor 18/21 User Manual
Page 48
36
Getting Started
2.6
Wall-mounting the TPZ-1300
The TPZ-1300 is shipped with a VESA 100 wall-mount brackets
and accessory screws. The bracket has four M4 mounting holes
with a pitch of 100 mm, allowing fixture to any VESA 100 compati-
ble mounting mechanism. The mounting bracket enables the
TPZ-1300 series controller to be mounted on a wall or the back of
a monitor. To wall-mount the TPZ-1300:
1. Prepare the wall-mount brackets and 4 M4 screws pro-
vided.