ADLINK iSeries Monitor 18/21 - Manual (Page 32)

20 Introduction
1.7.1 SATA Slot
The TPZ-1300 provides a Gen 2 SATA port at 3.0 Gbit/s, compati-
ble with SATA Gen 1 1.5Gbit/s. The SATA host controller supports
legacy mode using I/O space and AHCI mode using memory
space. This SATA connector accepts 2.5” and 3.5” (optional) HDD
or solid state disk (SSD). The disk must be installed in the SATA
connector with a HDD bracket. For installation information, see
“Installing a Hard Disk Drive” on page 28..
1.7.2 LVDS Interface Connector (optional)
The TPZ-1300 provides an internal LVDS interface connector,
supporting single channel up to 1366*768 24-bit resolution, with
pin numbering and definition as follows.
Figure 1-14: LVDS Pin Numbering
1 2