ADLINK IMX-3000 - Manual (Page 52)

IMX-3000
52
• Suffix Output Code
Add the suffix code in end of barcode content.
• Delimiter
Add a delimiter in end of barcode content.
• Auto Enter
Add an ENTER character in the end of one scan
2. Auto enable background scan when system boot
• The Reader Utility will be enabled in the background when the system boots.
3. Reset to default
• Revert to factory default settings.
8.2.5 Scan Mode
Mode Enable Hands Free Disable Hands Free
One time mode
Press the Scan button, then
release it. Align the aiming beam
with the barcode to scan the
barcode data. Press and hold the Scan button.
Align the aiming beam with the
barcode to scan the barcode
data.
Continuous mode
Fixed
interval
Press the Scan button, then
release it. Align the aiming beam
with the barcode to scan the
barcode.
The scan engine will trigger
continuously at 2 second
intervals. In this mode, repeated
barcode data will be ignored. Press and hold the Scan button.
Align the aiming beam with the
barcode to scan the barcode.
The scan engine will trigger
continuously at 2 second
intervals. In this mode, repeated
barcode data will be ignored.