ADLINK HPERC-IBR-HH - Manual (Page 33)

Internal Components 23
HPERC-IBR-H
2.1.6 Replacing the PCI/104-Express expansion module
The HPERC-IBR-H allows for expandable IO with a slot for a stackable PCI/104-Express mod-
ule, which is removable and can accommodate other stackable expansion boards. The PCI/
104-Express slot resides under the SSD bracket. Make sure to perform each of the steps in the
following procedure to replace a PCI/104-Express module.
To remove the PCI/104-Express module from the enclosure
1) Shut down the system as described earlier in Shutting Down the HPERC-IBR-H.
2) Remove the SSDs and cover plate as described earlier.
3) Remove the SSD bracket screws and bracket as shown in Figure 2-10, making sure not to
damage the SSDs if still mounted to the bracket.
Figure 2-10: Exploded View of HPERC-IBR-H with SSD Bracket and Screws
Bracket Screws
SSD Bracket