ADLINK HPERC-IBR-HH - Manual (Page 19)

HPERC-IBR-H Setup 9
HPERC-IBR-H
Table 1-3: I/O Panel Connectors (Refer to Figure 1-5 for connector locations.)
Control/Connector Description
P1 DC Power In This Military Power connector accepts DC voltages from an external
source.
NOTE: This connector is manufactured by Amphenol.
P2 Military Connector This military connector provides signals for Ethernet Ports, USB 2.0,
Serial Ports, Reset Switch, Ethernet LEDs, and UNDIO.
P3 Military Connector This military connector provides signals for VGA, Ethernet LEDs,
Ethernet Ports, Serial Ports, PS/2 Keyboard and Mouse, and RCA
Jack.
NOTE: To connect an external Hard Disk Drive (HDD) or CD-ROM to the HPERC-IBR-H, use
one of the USB or SATA ports to connect the device.
GND V+
GND V+
GND V+
GND V+
A
D B
C
HPERC_DC_In_Pinout_b